01The Core
Mount it once. Change everything else.
The Core bolts to your wheelbase and carries power and data to whatever slides in next. It's the only part you'll ever need a tool for.
Production Run 01 · 318 of 500 reserved
A modular dashboard for sim racing. Slide in a screen, a switch panel, or both, then set the mood of the whole room from the dash.
01The Core
The Core bolts to your wheelbase and carries power and data to whatever slides in next. It's the only part you'll ever need a tool for.
02The slide
Modules ride hardened steel rails and seat on a 12-pin connector with a magnetic click. Pull one, slide in another, keep driving.
03The system
Start with a screen and a switch panel. Add signal lights next season. Every module we make fits the Core you already own.
Build yoursDisplay + Command
Lights fill from the outside in, so you read them in peripheral vision. Your eyes stay on the apex.
Halfway up the bar you're past the torque peak. Stay in it.
Points are set per car and per gear from real telemetry, not a fixed percentage.
The whole bar flashes on the shift point. Across both modules, and the Core's center light.
The bar resets and starts building again, all the way to the flag.
Tuned for the hour when the room goes dark and the lap times drop.
Each module throws a soft wash of light beneath it. Pick a color and this page follows, the way your rig will.
No drivers to hunt down, no cable runs behind the wheel. Three steps from box to grid.
Four bolts to your wheelbase with the included plate. The only time you'll need a tool.
Line it up with the rail and push. It seats on the 12-pin connector with a magnetic click.
Profiles load per car, so lights, keys and screens are ready before you leave the pits.
| Spec | Display | Command | Core |
|---|---|---|---|
| Primary | 6.0 in IPS, 1280 × 600 | 12 MX-compatible keys | Steel rails, both sides |
| Controls | — | 2 detented encoders | Status ring |
| Shift lights | 15 RGB | 15 RGB | 1 center |
| Underglow | 24 LEDs | 24 LEDs | — |
| Housing | CNC 6061-T6 aluminum, anodized Graphite, Silver or Bronze | ||
| Connection | 12-pin pogo per slot · single USB-C to PC | ||
| Software | Tessel Studio (Windows) · SimHub plugin · per-car profiles | ||
| Price | $399 | $299 | $149 |
Every module fits either slot and every Core. What you buy now keeps working with what we make next.
6-inch bonded screen, 1,000 nits, 15 shift lights. Gear, delta and fuel at a glance.
$399
12 hot-swap keys with per-key RGB, 2 knurled encoders.
$299
A 704-dot matrix for flags, position and pit calls.
$249
Adapter plates for the major direct-drive bases, plus open drawings to print or machine your own.
Five hundred numbered units, shipping April 2027. A $50 deposit holds yours and comes back in full if you change your mind.
318 of 500 reserved
The Core mounts with a standard M6 pattern. We include adapter plates for the major direct-drive bases and publish the drawings for everything else.
Yes. Your deposit holds a numbered unit, not a configuration. Change modules, finish or keycaps until we ask you to confirm before shipping.
Yes. Flag sync turns it amber under yellow, blue for a faster car, white in the pit lane, and back to your color on green.
The rails and connector are fixed for the life of the system. Anything we release slides into the Core you buy today.
Your $50 comes back in full, any time before your unit ships.